Index
18-3
48XX/49XXSHB0399
18 Table of keywords
0 ... 9
2Q operation, Change of the direction of
rotation, 4-23
4Q/2Q operation, 7-60
A
A/D conversion, 7-29
Absolute value generator, 7-78
Acceleration, 7-19, 7-85
Acceleration and deceleration times, 7-6
Accessories
Fuses, 13-2
Mains chokes, 13-7
Networking, 13-15
RFI filter, 13-12
System cable, 13-10
Act. value, Adjustment of tacho voltage,
4-15
Actual speed, Filter, 7-94
Actual value
Adjustment of the tacho voltage, 7- 11
Armature current, 4-16
Display, 12-5
Displays, 7-117
Feedback, 7-10
Actual value feedback, redundant actual
value feedback, 7-55
Adaptation
Current controller, 7-14
Process controller, 7-68
Speed controller, 7-93
Addition, 7-81
Torque, Additional values, 7-89
Additional set-value, 7-12
Additional setpoint, 5-6
Additional value, 7-89
Addtional set-value, 7-2
Adjustment
Field controller, 7-17, 7-18
Gain, 7-19
I*R compensation, 7-56
Offset, 7-19
Redundant actual value feedback, 7-56
Speed controller, 7-18
Ambient temperature, Operation, 3-1
Analog inputs and outputs, 4-14
Application as directed, 1-2
Application conditions, 3-3
Arithmetic blocks, 7-70
Armature choke, 14-3
Armature current
Actual-value display, 4-16
Monitoring, 7-28
Armature fuse, 13-4
Armature time constant, 7-14
Assembly space, 3-1
Automation module, Winding drive,
15-20
Auxiliary starting circuit, Field controller,
4-6
B
Baud rate, 4-26, 12-2
Brake control, 5-6, 7-62
C
Cable protection fuses, 13-3
Cable-protection fuses, 15-24
Cascading factor, 7-48
CE conformity, 1-4
CE-typical drive system, 4-29
Components, 4-30
Filters, 4-31
To Next Page
Loading...
