Lenze 4800 - Page 209

Configuration
7-118
48XX/49XXSHB0399
Switch-on display
After switching on the controller, C083 is displayed first (field current). To change
the switch-on display, enter the required code number under C004.
Code Name
Possible settings
C
o
d
e
N
a
m
e
Lenze Selection Info
C004¤ Switch-on
display
83 0 {1} 999 Code No. for switch-on display: Can only
be changed if C001= -0-, -1-, -6-
Identification
The controller type is indicated under C093.
Code C099 indicates the software version used.
Code Name
Possible settings
C
o
d
e
N
a
m
e
Lenze Selection Info
C093* Device
identification
49XX Display: controller type
C099* Software
versions
49 6.X Display: Series and software version
Show/Hide Bookmarks