Installation
821XKlimaBA0399 4-1
4 Installation
4.1 Mechanical installation
4.1.1 Important notes
- Use the controllers only as built-in devices!
- If the cooling air contains pollutants (dust, fluff, grease,
aggressive gases):
- take suitable preventive measures , e.g. separate air duct,
installation of filters, regular cleaning, etc.
- Observe free space!
- You can install several controllers next to each other
without free space in a control cabinet.
- Ensure unimpeded ventilation of cooling air and outlet of
exhaust air!
- Allow a free space of 100 mm at the top and at the
bottom.
- Do not exceed the ambient temperature permissible during
operation (see chapter. 3.1)
- With continous oscillations or vibrations:
- Check whether shock absorbers are necessary.
To Next Page
Loading...
