Configuration
821XKlimaBA0399 7-1
7 Configuration
7.1 Basics
- The configuration of the controller is used to adapt the drive
to your applications.
- For this, you have the following functions available:
- Operating functions
- Control function
- Display functions
- Monitoring functions
- The possible function settings are organized in codes:
- Codes are numerically sorted, starting from the code with
the smallest number to the one with the highest number.
All codes start with a ”C”.
- They are listed in the code table.
- Each code provides parameters which can be used to
adjust and optimize your drive.
- The configuration of the controller can be entered by means
of the keypad of the 8201BB operating module or by means
of a fieldbus via the serial interface.
- The operating module and fieldbus modules are available
as accessories.
- The changing of parameters by means of the operating
module or fieldbus modules is described
- in the Operating Instructions of the modules.
- in the Manual.
- All functions of the controller are described shortly in the
code table.
Note!
The functions are described in detail in the Manual.
To Next Page
Loading...
