Contentsi
l 4
EDS700ACBA EN 5.1
5.3 Dimensions 68. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.1 Devices with standard built−in design 68. . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.2 Assembly in standard built−in technique 69. . . . . . . . . . . . . . . . . . . . . . . . .
5.3.3 Devices with "cold plate" design 70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.4 Mounting in "cold plate" technique 71. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.5 Devices with push−through design 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.6 Assembly in push−through technique (thermal separation) 77. . . . . . . . . .
5.4 Notes on mounting the device version in push−through design 79. . . . . . . . . . . . . .
6 Electrical installation 86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1 Important notes 86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.1 Electrical isolation 87. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.2 Device protection 87. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.3 Motor protection 88. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.4 Interaction with compensation equipment 88. . . . . . . . . . . . . . . . . . . . . . .
6.2 Safety instructions for the installation according to UL/CSA 89. . . . . . . . . . . . . . . . .
6.3 Installation according to EMC (installation of a CE−typical drive system) 93. . . . . . .
6.3.1 Shielding 93. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.2 Mains connection, DC supply 95. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.3 Motor cable 96. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.4 Installation in the control cabinet 97. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.5 Wiring outside of the control cabinet 99. . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.6 Detecting and eliminating EMC interferences 100. . . . . . . . . . . . . . . . . . . . .
6.4 Measures when drive is used in IT systems 101. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5 Preparations 103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5.1 Integrated PE conductor connection 103. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5.2 Integrated DC bus connection 104. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.6 Power supply modules 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.7 Axis modules 107. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 DC−bus operation 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 Introduction 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.1 Terminology and abbreviations used 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.2 Advantages of a drive system 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2 Conditions for trouble−free DC−bus operation 111. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2.1 Voltages 111. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2.2 Number of feeding points 111. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2.3 Other conditions 111. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3 DC−bus variants 112. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3.1 Supply with one power supply module 112. . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3.2 Supply with power supply modules operated in parallel 113. . . . . . . . . . . . .
7.3.3 Supply with regenerative power supply module 114. . . . . . . . . . . . . . . . . . .