Lenze EMF2180IB - 3 Product Description; Function; Application as Directed; Scope of Supply

Product description
Function
3
EDKMF2180 DE/EN/FR/ES/IT 3.0 37

-H1-typbez
3 Product description
Function
The communication module is used for setting parameters during remote maintenance or
programming and commissioning the usable devices:
Application as directed
The communication module can be used with the following Lenze devices:
ƒ Servo Drives 9400
ƒ Inverter Drives 8400
ƒ 9300 servo inverter
ƒ 9300 vector
ƒ 9300 Servo PLC
ƒ ECS servo system
ƒ 8200 motec motor inverter
ƒ 8200 vector frequency inverter
ƒ 82XX frequency inverter
ƒ Drive PLC
ƒ Terminal extension 9374
ƒ Control / display unit (EPM-HXXX)
ƒ I/O system IP20 (EPM-TXXX)
Scope of supply
ƒ Communication module EMF2180IB (EthernetCAN)
ƒ Mounting Instructions
 Tip!
Further information about this communication module can be found in the
corresponding communication manual.
The pdf file can be found on the Internet in the ”Services & Downloads” area
under
http://www.Lenze.com