Lenze EMF2180IB - 6.4 Initial Switch-on

6 Electrical installation
EDKMF2180 DE/EN/FR/ES/IT 3.0 44

H1_E_INST-SteckerFederkraftAnschluss FKCT
6 Electrical installation
2180FEW008
Installation steps
Step Activity Terminal
(see graphic)
Additional
information
1. Establish a connection to the CAN bus:
Plug the Sub-D plug (”EWZ0046”, see
accessories) into the communication
module.
 47
2.
Connect the following components via
Ethernet with each other:
50
 Communication module

 PC

 Servo Drives 9400

 Other Ethernet nodes
3. Connect voltage supply to the plug
connector
 52