Lenze EPM-H505 - Status messages of the operating unit

Commissioning
Status messages of the operating unit
5

72
EDBPM−H505 DE/EN/FR 6.1
5.3 Status messages of the operating unit
The operating unit status can be queried any time. Information can be obtained
about
ƒ the interface (Port)
ƒ the name of the loaded driver (Driver)
ƒ the version of the loaded driver (Ver)
ƒ the network address of the operating unit (Addr)
ƒ the last error (Error)
If you want to ... Touch the fields ... Example
A ... query the status of the operating
unit.
l For this purpose, touch the
display at the corners
– top right  and bottom left 
or
– top left  and bottom
right .
l The first corner to be touched
must not contain a selectable
field.
0
1
2
3
B ... close the status display.
ESC
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRANS
PAGE