Lenze EPM-H505 - Date;time and contrast setting

Commissioning
Date/time and contrast setting
5

73
EDBPM−H505 DE/EN/FR 6.1
5.4 Date/time and contrast setting
If you want to ... Touch the fields ... Example
A ... set the date/time and contrast
on the display.
1. Call status messages. For this
purpose touch the corners of
the display
– top right  and bottom left 
or
– top left  and bottom
right .
The first corner to be touched must
not contain a selectable field.
0
1
2
3
2. Select the menu for time/date
and contrast.
PROG
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRANS
PAGE
B ... set date/time.
ESC
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
1. Touch the SET CLOCK" field to
select the menu.
2. Select the desired field.
or
ESC
12:50:10 13/09/00
3. Change the value.
or
4. If necessary, repeat step 2. and
3. to change additional values.
5. Confirm the input.
– The menu for time/date and
contrast is displayed.