During operation
6-2 820XBA1097
-
If you use the function CW/CCW (selection of the direction of
rotation)with the configuration C007 = -0- to -13-:
- Thedrivecanreversethedirectionofrotationintheevent
of a control-voltage failure or a cable break.
-
If you use the function ”Flying-restart circuit” (C142 = -2-, -3-)
with machines with low inertia torque and friction:
- The motor can start for a short time or reverse the direction
of rotation for a short time after enabling the controller
when the motor is in standstill.
To Next Page
Loading...
