Lenze Global Drive 8200 Series

Contents
820XBA1097 i
1 Preface and general information 1-1...........................
1.1 About these Operating Instructions ... 1-1.......................
1.1.1 Terminology used 1-1...............................
1.1.2 What is new? 1-2..................................
1.2 Scope of delivery 1-2.....................................
1.3 Legal regulations 1-3.....................................
2 Safety information 2-1......................................
2.1 General safety information 2-1...............................
2.2 Layout of the safety information 2-3...........................
2.3 Residual hazards 2-4.....................................
3 Technical data 3-1.........................................
3.1 General data/application conditions 3-1.........................
3.2 Rated data (Operation with 150 % overload) 3-2...................
3.2.1 Types 8201 to 8204 3-2.............................
3.3 Fuses and cable cross-sections 3-4...........................
3.3.1 Single drives with 150 % overload 3-4....................
3.4 Dimensions 3-4.........................................
4 Installation 4-1............................................
4.1 Mechanical installation 4-1.................................
4.1.1 Important notes 4-1.................................
4.1.2 Standard assembly with fixing rails or fixing angles 4-3.........
4.1.2.1 Types 8201 to 8204 4-3......................
4.1.2.2 Type 8202-V002 (reduced assembly depth) 4-4.......
4.1.3 DIN-rail assembly 4-5...............................
4.2 Electrical installation 4-6...................................
4.2.1 Important notes 4-6.................................
4.2.2 Power connections 4-7..............................
4.2.2.1 Mains connection 4-7........................
4.2.2.2 Motor connection 4-7........................
4.2.2.3 Connection diagram 4-9.......................
4.2.3 Control connections 4-10..............................
4.2.3.1 Control cables 4-10...........................
4.2.3.2 Assignment of the control terminals 4-10............
4.2.3.3 Connection diagrams 4-12......................
4.3 Installation of a CE-typical drive system 4-13......................
All manuals and user guides at all-guides.com