Lenze Global Drive 8200 vector - Analog Input and Reset Error Messages

Troubleshooting and fault elimination
Error messages
16
L
EDK82EVXXX EN 2.0
Keypad RemedyCauseErrorPC
1)
rSt
*
76 Faulty auto-TRIP reset More than 8 fault messages in 10 minutes Depends on the error message
sd5
*
85 Wire breakage analog input 1
Current at analog input < 4 mA a t setpoint range 4
... 20 mA
Close circuit a t analog input
sd7
*
87 Wire breakage analog input 2
1)
LECOM-fault number, displa y in parameter setting program Global Drive Control (GDC)