Lenze I55AP A Series User Manual

General informaon
Operang Instrucons i550 protec4
1 Generalinformaon
Read this documentaon carefully before installing the inverter and
observe the safety instrucons!
This document only includes the most frequently asked quesons
and presents them in a simplied form for a beer overview. Detailed
technical and funconal explanaons can be found in the comprehensive
product documentaon.
The complete documentaon, further informaon and tools regarding
Lenze products can be found on the Internet: hp://www.Lenze.com
1.1 Target group
Work on the product must only be carried out by qualied personnel.
Qualied personnel are persons who have the following knowledge and
experience:
• They are familiar with the installaon, mounng, commissioning, and
operaon of electrical and electronic modules.
• They have the corresponding qualicaons for their work.
• They know and can apply all regulaons for the prevenon of
accidents, direcves, and laws applicable at the place of use.
1.2 Applicaonasdirected
The product is designed for the installaon into electrical systems or
machinery.
The i500 product family is designed for the power range of 0.5 ... 15 hp.
The inverter i550 protec is suitable for conveyors, packaging equipment
plus fan and pump systems. The inverter is not to be used as a household
appliance, but for commercial or professional purposes only.
The inverter is not a machine in terms of the Machinery Direcve.
The product must only be actuated under the operang condions and
power limits specied in this documentaon.
The user is not allowed to change inverters that come with integrated
safety technology.
1.3 Device-specicstandardsanddirecves
• The product meets the protecon requirements of the Low-Voltage
Direcve 2014/35/EU.
• The harmonized standard EN 61800-5-1 is used for the inverters.
(Europe).
• UL 61800-5-1 and CAN/CSA C22.2 No.274 are the North American
electrical safety standards.
1.4 Relevantstandardsanddirecvesfortheoperator
Applicaonasdirected
• If the product is used in accordance with the technical data, the drive
systems comply with the EN 61800-3 categories (Category C2 is similar
to FCC Class A).
• The inverter may only be used commercially or professionally as
dened by EN 61000-3-2.
• The test voltage for insulaon resistance tests between a control
potenal of 24 V and PE must be measured in accordance with
EN 61800-5-1.
• The cables must be installed in accordance with EN 60204-1 or US
Naonal Electrical Code NFPA 70/Canadian Electrical Code C22.1.
Commissioning
• Commissioning or starng the operaon as directed of a machine with
the product is prohibited unl it has been ensured that the machine
meets the regulaons of NFPA 79 (machinery safety – US), Z432
(machinery safety – Canada), NFPA 70 (US Naonal Electrical Code)
and CEC C22.1 (Canadian Electrical Code).
• In residental areas, the product may cause EMC interferences. The
operator is responsible for execung the interference suppression
measures.

Lenze I55AP A Series Specifications

General

Brand	Lenze
Model	I55AP A Series
Category	Inverter
Language	English