Lenze I55AP A Series User Manual

Safety instrucons
Operang Instrucons i550 protec6
2.2 Layoutofwarningnoces
Safety instrucons protect against injury to persons or damage to
property. The measures described for the prevenon of hazards must be
complied with.
DANGER
Indicates an extremely hazardous situaon. If this instrucon is
ignored, serious, irreversible injury or death will result.
WARNING
Indicates an extremely hazardous situaon. If this instrucon is
ignored, serious, irreversible injury or deadly injuries may result.
CAUTION
Indicates a hazardous situaon. If this instrucon is ignored, serious,
light or moderate injuries may result.
NOTICE
Indicates a material hazard. If this instrucon is ignored, material
damages may result.
2.3 Residual hazards
The user must take the residual hazards menoned into consideraon in
the risk assessment for his/her machine/system.
If the above is disregarded, this may result in injuries to persons and
material damage!
Product
Observe the warning labels on the product!
Electrostacsensivedevices
Before working on the product, the sta must ensure to be free of electrostac charge.
Dangerous electrical voltage
Before working on the product, make sure there is no voltage applied to the power
terminals! Aer mains disconnecon, the power terminals will carry the hazardous elec-
trical voltage for the me given next to the symbol!
High leakage current
Carry out xed installaon and PE connecon in compliance to standard:
EN 61800-5-1/EN 60204-1
Hot surface
Use personal protecve equipment or wait unl the device has cooled down!
Motor
In the event of a short circuit of two power transistors, a residual
movement of up to 180°/number of pole pairs on the motor may occur
(e.g. 4-pole motor): residual movement max. 180°/2 = 90°).

Lenze I55AP A Series Specifications

General

Brand	Lenze
Model	I55AP A Series
Category	Inverter
Language	English