Lenze i700 Series

Safety engineering
Certification
10
l
133
EDS700ACBA EN 5.1
10.4 Certification
The certification of the safety system integrated in the controllers of the i700 series is
based on the following test fundamentals:
ƒ EN ISO 13849−1
Safety of machinery − Safety−related parts of control systems − Part 1: General
principles for design
ƒ EN ISO 13849−2
Safety of machinery − Safety−related parts of control systems − Part 2: Validation
ƒ EN 60204−1
Safety of machinery − Electrical equipment of machines − Part 1: General
requirements
ƒ IEC 61508, Part 1−7
Functional safety of electrical/electronic/programmable electronic safety−related
systems
ƒ EN 61800−3
Adjustable speed electrical power drive systems − Part 3: EMC requirements and
specific test methods
ƒ EN 61800−5−1
Adjustable speed electrical power drive systems − Part 5−1: Safety requirements −
Electrical, thermal and energy
ƒ EN 61800−5−2
Adjustable speed electrical power drive systems − Part 5−2: Safety requirements −
Functional
ƒ EN 62061
Safety of machinery − Functional safety of safety−related electrical, electronic and
programmable electronic control systems
, Declarations of conformity and certificates can be found on the internet
at:http://www.Lenze.com and on the product CD.