Lenze MOBILE DCU PSU

Installation
Connections of MOBILE DCU, PSU, DCU PSU
Control system
5
Ò
58
EDSMDAG EN 2.0
5.6.6 Control system
X31 Description
20
14
8
1
1 CAN_H_TERM_PUBLIC Public CAN, bus termination CAN−High
2 CAN_H_PUBLIC
Public CAN In
3 CAN_L_PUBLIC
4 InterLock2 Potential−free output, connection 2
5 CAN_L_PRIVATE
Private CAN
6 CAN_H_PRIVATE
7 InterLock1 Potential−free output, connection 1
8 TRM15 Switch on/off device
9 CAN_H_PUBLIC
Public CAN Out
10 CAN_L_PUBLIC
11 CAN_L_TERM_PUBLIC Public CAN, bus termination CAN−Low
12 ID_PIN1
Address offset for setting the CAN address
13 ID_PIN3
14 FLX_IN4
Digital inputs
l Can also be parameterised as frequency inputs
15 FLX_IN3
16 FLX_IN2
Digital inputs
l Can also be parameterised as analog inputs
17 FLX_IN1
18 ID_PIN2
Address offset for setting the CAN address
19 ID_PIN4
20 TRM31 Vehicle mass, negative pole of the vehicle battery
21 TRM30
Supply voltage for control electronics
22 TRM30
23 FLX_OUT4
Digital outputs
24 FLX_OUT3
25 FLX_OUT2
EMDAG020c
26 FLX_OUT1