Lenze MOBILE DCU PSU - Mobile Dcu S

Accessories (overview)
Individual parts for the electrical installation
MOBILE DCU S
8
Ò
72
EDSMDAG EN 2.0
Control at X31
Name Type Manufacturer Use
Socket housing Superseal 1.0, 26−pole 3−1437290−7
TE Connectivity MOBILE DCU
MOBILE PSU
MOBILE DCU PSU
Crimp socket
0.75 ... 1.25 mm
2
3−1447221−3
0.5 mm
2
3−1447221−4
0.3 mm
2
3−1447221−5
Sealing plug 4−1437284−3
Strands suitable for
vehicles
0.3 ... 1.25 mm
2
3−1437290−7
CAN cable acc. to ISO 11898−2 ˘ ˘
Tightness according to manufacturer information:
ƒ Use a strand diameter of 1.6 ... 2.2 mm.
Feedback at X32, X33
Name Type Manufacturer Use
M12 connector with prefabricated cable, 8 × 0.25 mm
2
(AWG24), shielded
A coded, 90° angled
M12 e.g.
Phoenix Contact
MOBILE DCU
MOBILE DCU PSU
8.2.2 MOBILE DCU S
Here, the required material for plugs, plug parts and cables are listed and assigned to
terminals.
Control at X1
Name Type Manufacturer
Socket housing Leavyseal
AMP MCP 2.8 SOCKET HSG.,21POS.ASSY code A
black/yellow 3−1437290−7
TE Connectivity
COVER F.21P REC−HSG black 9−1394050−1
2,8 blanking plug transparent 828922−1
2,8 single conductor seal 1.4...2.1mm blue 828904−1
2,8 single conductor seal 2.2...3.0mm white 828905−1
AMP MCP 2.8, CONTACT SWS 2mm−goldplated 0.5...1.0mm
2
1−968855−2
AMP MCP 2.8, CONTACT SWS 1...3mm−tinplated 0.5...1.0mm
2
1−968855−1
AMP MCP 2.8, CONTACT SWS 3...5mm−silverplated 0.5...1.0mm
2
1−968855−3
AMP MCP 2.8, CONTACT SWS 2mm−goldplated 1.5...2.5mm
2
1−968857−2
AMP MCP 2.8, CONTACT SWS 1...3mm−tinplated 0.5...1.0mm
2
1−968857−1
AMP MCP 2.8, CONTACT SWS 3...5mm−silverplated 0.5...1.0mm
2
1−968857−3