About this documentation 1
Document history
Contents
This documentation provides you with information about the intended use of the Panel
Controller / HMI p300 in the Lenze "Controller-based Automation” control system.
Reference manual "Controller”
Here you can find detailed information on the parameter setting and
programming of the Lenze Controllers.
Target group
This documentation is directed at qualified skilled personnel according to IEC 60364.
Qualified skilled personnel are persons who have the required qualifications to carry out
all activities involved in installing, mounting, commissioning, and operating the
product.
1.1 Document history
Version Description
2.0 08/2014 TD17 • EAC conformity supplemented
• General updates and corrections
• New layout
1.1 07/2014 TD15 corrected: Torque for mounting 10.9 cm (4.3 ”)
1.0 03/2014 TD15 First edition
Lenze • BA_p300 • 2.0
5
To Next Page
Loading...
Need help?
General
