Email server address. It could be an IP address or domain
name. Domain name can be translated only it is the correct
DNS configuration.
Email server port number.
Apply the email server user name.
Input the password corresponding to the user.
Set the email sender address
Send the email to appointed receivers when the alarm is
turned on. You can set three receivers at most.
Enable or disable alarm snapshot.
IP filter can be set to block IP addresses which you do not want to get by
this NVR.
Choose Enable to make sure all IP Filter settings available.
You can select Blacklist or whitelist
Input the IP address which can be added to the Banned IP
list.
All the IP addresses which are banned would be in this
Banned IP list.
To Next Page
Loading...