Leopard Security LI-NVR-6209 - Motion Detect

H264 NVR User’s Guide
16
4.6 Motion Detect
When system detects the motion signal that reaches the set sensitivity, the motion
detect alarm is on and the linkage function is turned on.
Figure 8: Motion Detect
CAM
Choose the set motion detect channel.
Enable
means that the motion detect function is on.
Sensitivity
Choose in the six options according to the sensitivity.
Region
Click setup and enter the set area. The area is divided into
16 x12 blocks. Grey block means the dynamic detect
defensive area. Black block means the unfenced area. You
can set the area as followed, Drag the mouse and draw the
area.