Table of contents
Leuze electronic MLC 510 4
8 Starting up the device ........................................................................................38
8.1 Switching on ......................................................................................................................... 38
8.2 Aligning the sensor ............................................................................................................... 38
8.3 Aligning of deflecting mirrors with the laser alignment aid.................................................... 39
9 Testing .................................................................................................................40
9.1 Before commissioning and following modifications .............................................................. 40
9.1.1 Checklist for integrator – to be performed prior to commissioning and following modifica-
tions...................................................................................................................................40
9.2 To be performed periodically by competent persons............................................................ 42
9.3 Periodically by the operator .................................................................................................. 42
9.3.1 Checklist – periodically by the operator.............................................................................43
10 Maintenance ........................................................................................................44
11 Troubleshooting..................................................................................................45
11.1 What to do in case of failure? ............................................................................................... 45
11.2 Operating indicators of the LEDs.......................................................................................... 45
12 Disposing.............................................................................................................46
13 Service and support ...........................................................................................47
14 Technical data .....................................................................................................48
14.1 General specifications .......................................................................................................... 48
14.2 Dimensions, weight, response time ...................................................................................... 50
14.3 Dimensioned drawings: Accessories .................................................................................... 52
15 Order guide and accessories.............................................................................54
16 EU/EC Declaration of Conformity......................................................................60