level 1 System 1000 - Specifications; Physical Specifications; Electrical Specifications; Environmental Specifications

Specifications
_ If any electromagnetic or other interference between devices is found during
normal use, please notify your authorized distributor or SIMS Level 1 for
assistance.
This equipment is not suitable for use in the presence of a flammable anesthetic
. mixture, with air or with oxygen or nitrous oxide. Additional circuit diagrams and
information are available upon request.
This device complies to: UL544
Physical Specifications
«Length, overall
“Width, overall
Depth, overall
Weight, assembled, dry
Distilled water capacity
Air source pressure
Electrical Specifications
Input Voltage
Operating Freguency
Operating Current
Auxiliary Outlet
|. Temperature Set Point
| Over Temperature Set Point
Environmental Specifications
«Operation.»
10°C-45C
—
|
Transport
0°С-70°С
Storage
0°C-70°C
48 inches (1.22m)
13 inches (34cm)
10 inches (26cm)
20 pounds (9.5kG)
0.43Gal (1.4L)
300 mmHg
110 VAC
50-60 HZ
12 Amps
1.5 Amps
41.7°C +0.3°C
43.9 °С + 0.1°С
Humidity
_ 30%-75%
30%-75%
30%-75%
‘This product may be a potential biohazard. Handle and dispose ofin ©
accordance with accepted médicäl practice and applicable regulations.
Accessory, Maintenance and Calibration Part Numbers
H-2 Pressure Infusion Chambers:
O-Ring Kit:
Thermal Calibration Well: |
D-Series Calibration Thermometer
7204010
8004003
8003002
24