level 1 System 1000 - Page 9

6. Close the drain valve (seen in Figure 6) on the bottom of the unit. Remove the fill
port plug on the front of the unit and fill the tank with 1.4 liters of distilled water.
Replace the fill port plug.
~~
ーーー ここ
n
md
=
~.
mn
て ここ ここ
ad
Figure 2. System 1000 assembly.
CAUTION: Tap water will increase earth leakage current. For proper system
operation and component life, use only DISTILLED WATER in the water reservoir.
7. Plug the unit into the appropriate electrical outlet. (See specifications for
details.) |