LevelOne FCS-4000 - PTZ Control

62
Advance
PTZ Control
In this section, it provides Pan, Tilt, Zoom, Focus, Iris and Auto Pan speed control setting
saved, as well as the Protocol, Baud rate and Address which depend on Speed Dome control
module.
Setting
Pan speed：Use it to move bar from 0 to 100.
Tilt speed：Use it to move bar from 0 to 100.
Zoom speed：Use it to move bar from 0 to 100.
Focus speed：Use it to move bar from 0 to 100.
Iris speed：Use it to move bar from 0 to 100.
Auto Pan speed：Use it to move bar from 0 to 100.