transmission rate can be increased when enable this function.
Packet Aggregate An aggregation method like A-MSDU, it can improve the transmission
efficiency. Please make sure you Wireless card has this function
supported.
HT Control Field Choose Enable/Disable. It is useful when you need to debug the
wireless network
Reverse Direction
Grant
Choose Enable/Disable. The response time can be shorter when
enable this function.
Link Adapt Choose Enable/Disable. The function is use to dynamically change the
modulation and encode mechanism between wireless devices.
Short Guard Interval
(SGI)
Choose Enable/Disable. Short GI can improve some transmission rate,
but with less immunity when interference exist.
Operation Mode Choose Mixed mode or Greenfield. You may choose Greenfield mode
to increase the transmission rate when you using 802.11n wireless
network only.
HT Band Width Using HT20MHz or HT20/40MHz
Block Ack Setup
Automatically
Choose Enable/Disable. If your Wifi Card supported Block Ack
mechanism, it can improve the data transmission efficiency when
enable this function.
Block Ack Window
Size
Specify a Block Ack window size
Reject Block Ack Choose Enable to reject the request of BA from other Wireless device
MCS Select transmission (connection) speed.
To Next Page
Loading...
