Wireless AP Setting:
Channel: choose the radio channel number. The default channel of
Network Storage is “1”. Please DO NOT set the same channel
with your existed wireless network.
SSID: the SSID identifies a specific wireless LAN. Before
associating with a particular wireless LAN, a station must have the
same SSID as the access point. The default SSID setting is
“WAP-0008”.
Authentication: authentication ensures that digital data
transmissions are delivered to the intended receiver. This option
enables you to set the authentication method for various encryption
schemes.
WEP Encryption: select “64” or “128” bits for encryption method to
protect your data by encrypting it. The WEP key can be 5(or 13)
ASCII characters or 10(or 26) hexadecimal characters based on
whether you select 64 bit or 128 bit WEP encryption.
To Next Page
