8 OPERATING INSTRUCTIONS
11
8.1 Operating Procedures
• User authorization
• Connect to Vehicle Charging Inlet
• Charging Message
• Charging completed
NOTE: Device may need to be activated or de-activated with RFID cards.
NOTE: RFID access control is disabled by default on all units. See section 8.2 for operation
with RFID enabled.
WARNING: This device should be supervised when used around children.
CAUTIONS:
• Please use the charger properly. Do not hit or press hard on the enclosure. If the case is damaged,
please contact a professional technician.
• Do not put heavy objects on the charger to avoid danger.
To Next Page
Loading...
