Hazardous voltage may be present.
Always isolate the console from the mains power supply before performing any
cleaning procedure. Furthermore, assure that all connections are sealed either
with an attached connector or a protective cover.
The console can be cleaned by wiping off the housing with a soft cloth using either Isopropanol or water. In
any case the console must be isolated from the mains power and all connections shall be sealed by an attached
connector or by the protective covers, which is assembled on all connectors.
7 Troubleshooting
In case of problems or failures the console provides various notifications with background information and
potential mitigation actions to the user, which should be self-explaining. More details to the notification concept
and its configuration can be found in the LCO Console Software Manual PL-4067-00.
If problems or failures can’t be solved with the help of the notification on the console screen, it is recommended
to capture a data log during operation, as described in LCO Console Software Manual PL-4067-00, until the
failure appears and then send the data log file to the Levitronix
®
Technical Service Department or the
appropriate key account manager.
8 Technical Support
For troubleshooting, support and detailed technical information contact Levitronix
Technical Service
Department:
Levitronix
Technical Service Department
Technoparkstr. 1
CH-8005 Zurich
Switzerland
Phone for US: 888-569 07 18
Phone for outside US: +1 888-569 07 18
E-Mail: TechSupport@levitronix.com
To Next Page
Loading...
Need help?
General
