29
If not using the air purifier for an extended period of time,
wrap the filter in plastic packaging and store in a dry place
to avoid moisture damage.
Cleaning the Dust Sensor Lens Storage
1. Turn o and unplug the air purifier.
2. Open the dust sensor cover. [Figure 4.1]
Figure 4.2
Figure 4.1
Figure 4.3
foam piece
Note: Do not remove the foam piece attached to the dust sensor
cover unless instructed by Customer Support. [Figure 4.3]
3. Use a cotton swab, dipped in water, to clean the dust
sensor lens. [Figure 4.2]
4. Wipe the lens dry with a cotton swab.
To Next Page
Loading...
