Levoit LV-PUR131S - Controls and Indicators; Air Purifier Button Functions; WiFi and Air Quality Status Lights

7
CONTROLS
On/O Button
• Turns the air purifier on or o.
• Press and hold for 5 seconds to put the air
purifier into Configuration Mode.
• Press and hold for 15 seconds to reset to
original settings.
WiFi Indicator
Sleep Mode Button
• Turns Sleep Mode on or o
(see page 9).
Air Quality Indicator
• Displays air quality using the dust sensor inside the air
purifier.
• It may take up to 1 minute to detect air quality.
Display O Button
• Turns the display o.
• Press any button (except ) to turn the
display back on.
Auto Button
• Turns Auto Mode on or o
(see page 9).
Air Quality Indicator Chart
Colour Air Quality
Red Bad
Yellow Moderate
Green Good
Blue Very Good
WiFi Indicator Status
is o
Air purifier is not configured with the
VeSync app. To configure, see page 11.
blinks 1 time
per second
Air purifier is in Configuration Mode (see
page 11).
blinks 4 times
per second
Air purifier has been hard reset
(see page 24).
blinks 2 times
per 5 seconds
Air purifier cannot connect with router.
blinks 1 time
per 5 seconds
Air purifier has connected with router
successfully, but the router can not
connect to the VeSync server.
is on and not
blinking
Configuration with the VeSync app is
complete.
Fan Speed Button
• Cycles through fan speeds: low,
medium, and high.
• The fan speed cannot be changed
during Auto or Sleep Modes.
Timer Button
• Sets or cancels a timer
(see page 9).