To Next Page
E
Edward SantanaAug 26, 2025
What to do if the light is red on my Levoit LV600S?
- VVictor MclaughlinAug 27, 2025
Fill the water tank and place it properly on the base. You can also clean or replace the water filter.
What to do if the light is red on my Levoit LV600S?
Fill the water tank and place it properly on the base. You can also clean or replace the water filter.
Why does my Levoit LV600S make a loud noise?
Ensure the water tank is properly in place. Try setting the mist level to a lower setting. You can also empty the base chamber, refill the water tank, and place it properly onto the base. If using the warm mist function and the water level is low, add more water to the tank.
What to do if my Levoit LV600S Humidifier is leaking water?
Avoid running the humidifier in a room with over 60% relative humidity. Wipe any excess water off the top and bottom of the base. Do not shake the humidifier. Ensure the humidifier is on a flat, level surface. If the water tank is leaking, further assistance is needed.
General| Model | LV600S |
|---|---|
| Water Tank Capacity | 6 liters |
| Smart Features | Yes |
| App Compatibility | VeSync App |
| Voice Control Compatibility | Amazon Alexa, Google Assistant |
| Essential Oil Diffuser | Yes |
| Auto Mode | Yes |
| Sleep Mode | Yes |
| Humidistat | Yes |
| Type | Ultrasonic |
| Coverage Area | Up to 753 sq ft |
| Runtime | Up to 50 hours |
| Mist Output | 500 mL/hour |
| Modes | Auto, Sleep, Manual |
| Display | LED |
| Noise Level | ≤30dB |
Warnings about water, liquids, and electrical hazards to prevent damage and injury.
Critical warnings regarding what liquids to add and where to add them to prevent damage.
Comprehensive guide on how to remove mineral buildup (descale) and clean internal components.
Solutions for common problems related to the humidifier not turning on or producing mist.
Troubleshooting steps for issues concerning rapid water consumption and unusual smells.
Addresses problems like unusual noise, mist leaks, white dust, visible leaks, and condensation.
Solutions for mist temperature issues, mold growth, essential oil scent, humidity readings, and error codes.
Troubleshooting steps for common issues with connecting the humidifier to the VeSync app or it appearing offline.
Explains potential causes for inaccurate humidity readings displayed in the VeSync app.
