Lexicon
2-14
PCM 91 User Guide
3.6 Int Clock
You can choose to have the PCM 91 transmit MIDI Clock at the current tempo
rate by setting this control to On and Tempo mode Source (0.2) to Internal. If
this control is set to Off, MIDI Clock will not be transmitted.
3.7 SysEx
This control is provided for communication with one or more additional PCM 91s
or computer editor software. On (the default setting) allows SysEx messages
to be received by the PCM 91. Press Load/✱ to select device ID (0-126 ).
3.8 Dump
Press Store to configure the PCM 91 to execute MIDI dumps of single effects,
banks, maps, chains, or setups.
With the exception of Setup Dumps, all dumps are transmitted in PCM 90 format,
which is also recognized by the PCM 91. You can dump from the front panel of
either unit to the other. As the PCM 90 has only five Banks (0-4), references to
Banks 5-8 will be ignored when transmitted to a PCM 90.
3.9 Dump Speed
Turn ADJUST to select dump speeds of Slow, Medium or Fast to achieve
compatibility with the connected MIDI device.
To Next Page
Loading...
