Arguments for one-dimensional bar codes
72
/Special boolean Optional
For UPC-A, the default value is false.
• If value is set to false, then the checksum is printed at
bottom left of the bar code.
• If value is set to true, then the checksum is printed at middle
left of the bar code.
For Code 3 of 9, the default value is false.
• If value is set to false, then the start/stop * characters with
text does not print.
• If value is set to true, then the start/stop * characters with
text prints.
For French
1
and German postal, then the default value is true.
• If value is set to false, then the embedded text for bar code
will not be formatted.
• If value is set to true, then the embedded text for bar code
will be formatted.
/PrintCheckChar boolean Optional
Except for French
1
and German postal codes, the default value is
false.
• For French
1
and German postal codes, the default value is
true.
• If value is set to false, the checksum character with text
does not print.
• If value is set to true, the checksum character with text
prints.
For the UPC-E symbologies, checksum characters are always
printed if embedded text is specified.
• If value is set to false, then the checksum characters are
printed with the same height as the text.
• If value is set to true, then the checksum characters are
printed at half the height of the text.
Key Type Definition
1
For the French postal symbology, /Special and /PrintCheckChar are always set to true and cannot be
changed to false.
To Next Page
Loading...
Need help?
General