Lexmark 2500+ Series - Page 17

Power
Set TOF LineFeed Macro
Setup
Pitch
10
12
15
17
20
24
P5
Lock
123 4
Micro Micro
4
5
6
7
1
2
3
Button Description
1 LineFeed This advances the paper one line.
Note: Press and hold LineFeed to advance the paper 5 micro movements, and then go into continuous
feed.
2 Macro This supports different styles of pre‑printed forms and selects between four document formats.
3 Setup This is used to enter Setup mode. This lets you change the default values and modes of printer operation.
4
Micro
This feeds the paper downward in small incremental movements.
Note: Press and hold this button to select continuous feed.
5 Pitch This sets the character pitch to: 10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi, or proportional spacing.
Notes:
• On 2590+ or 2591+ models, you can also select 24 cpi.
• Fast Draft supports only 10, 12, and 15 pitch.
6
Micro
This feeds the paper upward in small incremental movements.
Note: Press and hold this button to select continuous feed.
7 Set TOF This sets the Top‑Of‑Form, which is the position of the first print line on the page.
Using the control panel 17