Lexmark 2500+ Series - Disabling Font Lock; Selecting and Locking a Pitch; Disabling Pitch Lock

Disabling Font Lock
1 To disable Font Lock, press Font repeatedly until the Font Lock light turns off and the font you want is selected.
2 If the printer is offline, press Start/Stop.
The printer is ready to print when the Ready light comes on.
Selecting and locking a pitch
The printer data stream may contain control codes which select a particular pitch. To override the codes, you can select
and lock a particular pitch of your choice.
1 To select a pitch, open the control panel to layer 2.
Power
Set TOF LineFeed Macro
Setup
Pitch
10
15
17
20
24
123 4
Micro Micro
12
Lock
2 Press Pitch repeatedly until the pitch light comes on next to the pitch you want.
3 Continue pressing Pitch until the Pitch Lock light comes on and the pitch you want is selected.
The pitch is locked until the printer is turned off.
Disabling Pitch Lock
1 To disable Pitch Lock, press Pitch repeatedly until the Pitch Lock light turns off and the pitch you want is selected.
2 Close the control panel.
3 If the printer is offline, press Start/Stop.
When the Ready light comes on, the printer is ready to print.
Using the control panel 21