4 Press .
5 Press or repeatedly until Dial Prefix appears.
6 Press .
7 To change the setting, press or repeatedly until Create appears.
8 Press .
9 Enter the prefix to be dialed before each telephone number.
10 Press to save the setting.
Setting the distinctive ring
Distinctive ring is a service provided by some telephone companies that assigns multiple phone numbers to a single
telephone line. If you subscribe to this service, you can program your printer to have a distinctive ring pattern and
phone number for incoming faxes.
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Recv. Setup appears.
4 Press .
5 Press or repeatedly until Distinct Ring appears.
6 Press .
7 Press or repeatedly until the ring pattern you want appears.
8 Press to save the setting.
Setting the number of rings before receiving a fax automatically
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Recv. Setup appears.
4 Press .
5 Press or repeatedly until Number–Rings appears.
6 Press .
7 Press or repeatedly until the setting you want appears.
8 Press to save the setting.
9 Make sure the Fax Auto Answer light is on.
When the number of rings you set is detected, the printer automatically receives the incoming fax.
57
To Next Page
Loading...
