Lexmark 7300 Series - Using a Pictbridge-Enabled Digital Camera to Control Printing Photos; Customizing Photos; Creating and Printing a Scrapbook or Album Page

Using a PictBridge-enabled digital camera to control printing photos
Connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print
photos.
1 Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2 Insert the other end of the cable into the PictBridge port on the front of the printer.
Note: Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information,
see the camera documentation.
3 Follow the instructions in the camera documentation to select and print photos.
Customizing photos
Creating and printing a scrapbook or album page
1 Load paper. For best results, use photo or glossy paper with the glossy or coated side facing down.
2 From the desktop, double-click the Productivity Suite icon.
3 Click Manage Photos.
4 Click Show Folders.
5 From the directory in the right panel, select the folder where your photos are stored.
6 Close the directory in the right panel.
7 From the Productivity Tools section, click Print an album page with various photo sizes.
8 From the “Paper Size” drop-down menu, select a paper size.
9 From the “Page Layout” drop-down menu, select a page layout.
For more options:
a Click Change the category of layouts listed above.
b Select a layout for the photos.
c Click OK.
d From the “Page Layout” drop-down menu, select a page layout.
64