Troubleshooting
• “Setup troubleshooting” on page 75
• “Print troubleshooting” on page 79
• “Copy troubleshooting” on page 82
• “Scan troubleshooting” on page 84
• “Fax troubleshooting” on page 86
• “Network troubleshooting” on page 91
• “Jams and misfeeds troubleshooting” on page 92
• “Error messages” on page 94
• “Removing and reinstalling the software” on page 100
Setup troubleshooting
Incorrect language appears on the display
1 From the control panel, press Copy Mode.
2 Press .
3 Press or repeatedly until appears next to 9.
4 Press .
appears next to 1.
5 Press .
6 Press or repeatedly until the language you want appears on the display.
7 Press to save the setting.
75
To Next Page
Loading...
