Lexmark C2326 User Manual

Set up, install, and
configure
Selecting a location for the printer
• Leave enough room to open trays, covers, and doors and to install hardware options.
• Set up the printer near an electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product
near water or wet locations.
• Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.
• Provide a
flat,
sturdy, and stable surface.
• Keep the printer:
– Clean, dry, and free of dust
– Away from stray staples and paper clips
– Away from the direct airflow of air conditioners, heaters, or ventilators
– Free from direct sunlight and humidity extremes
• Observe the temperature range.
Operating temperature 10 to 32.2°C (50 to 90°F)
• Allow the following recommended amount of space around the printer for proper ventilation:
1 Top 10 1 m m (4 in.)
2 Rear 102 mm (4 in.)
3 Right side 76 mm (3 in.)
4 Front 76 mm (3 in.)
5 Left side 76 mm (3 in.)
Set up, install, and configure 18

Lexmark C2326 Specifications

General

Print Speed (Letter, Black)	26 ppm
Print Speed (Letter, Color)	26 ppm
Monthly Duty Cycle	Up to 50, 000 pages
Memory	512 MB
Maximum Paper Size	A4
Duplex Printing	Yes
Print Technology	Laser
Maximum Monthly Duty Cycle	50000 pages per month
Standard Connectivity	USB 2.0
Input Capacity	250 pages
Output Capacity	100 sheets
Paper Capacity	250 pages
Supported Media Sizes	A4, A5, A6, B5, Legal, Letter, Executive, Envelopes
Supported Media Types	Envelopes, Labels, Plain Paper, Transparencies
Operating Systems Supported	Windows, macOS, Linux