Lexmark C2326 - Printing a Font Sample List; Placing Separator Sheets between Copies; Canceling a Print Job; Adjusting Toner Darkness

Printing a font sample list
1 From the control panel, navigate to:
Settings > Reports > Print > Print Fonts
For non-touch-screen printer models, press
to navigate through the settings.
2 Select a font sample.
Placing separator sheets between copies
1 From the home screen, navigate to:
Settings > Print > Layout > Separator Sheets > Between Copies
For non-touch-screen printer models, press
to navigate through the settings.
2 Print the document.
Canceling a print job
From the printer control panel
For touch‑screen printer models, do the following:
1 From the home screen, touch Cancel Job.
2 Select a job to cancel.
For non‑touch‑screen printer models, press
.
From the computer
1 Depending on the operating system, do either of the following:
• Open the printers folder, and then select your printer.
• From the System Preferences in the Apple menu, navigate to your printer, and then open the print queue.
2 Select the job to cancel.
Adjusting toner darkness
1 From the control panel, navigate to:
Settings > Print > Quality > Toner Darkne ss
For non-touch-screen printer models, press
to navigate through the settings.
2 Adjust the setting.
3 Apply the changes.
Print 39