To Next PageTo Next PageWhy are blank pages feeding into the output bin of my Lexmark C920 Printer?
Blank pages may feed if an incorrect media type is loaded in the tray. Load the correct type media for your print job, or change the Paper Type setting to match the type of media loaded.
How to print documents with unavailable fonts on Lexmark C920 Printer?
If some documents do not print, it may be due to unavailable fonts. To resolve this, open the document in Adobe Acrobat, click the printer icon, and in the Print dialog box, check the 'Print as image' box, then click 'OK'.
What to do if the Lexmark C920 operator panel display is blank?
If the operator panel display is blank or shows only diamonds, it could indicate a failed self-test. Turn the printer off, wait 10 seconds, and turn it back on. If the 'Performing Self Test' and 'Ready' messages do not appear, turn the printer off and call for service.
How to troubleshoot tray linking issues on Lexmark C920?
If tray linking is not working, ensure that both the size and type of media are the same in both trays. Also, check that the paper guides in the trays are set for the correct size media, and the menu values for both size and type are set correctly in the Paper Menu.
What to do if held jobs do not print on Lexmark Printer?
If held jobs do not print, it may be due to a formatting error or invalid data. You can try to print the job (knowing that only part of it may print), delete the job, or free up printer memory by deleting other held jobs.
Why rubber feed rollers do not turn to advance paper on Lexmark C920?
Check that the power cord is firmly plugged into the back of the high capacity feeder and into an outlet that has power.
What to check if the paper tray does not raise or lower correctly on my Lexmark Printer?
Check the following: the printer is properly attached to the high capacity feeder, the printer is powered on, the power cord is plugged firmly into the back of the high capacity feeder, the power cord is plugged into an outlet, and the outlet has power.
What to do if my Lexmark C920 Printer prints blank pages?
If blank pages are feeding into the output bin, an incorrect media type may be loaded in the tray being printed from. Load the correct type of media for your print job, or change the Paper Type setting to match the type of media loaded.
What to do if held jobs do not print on my Lexmark C920 Printer?
If held jobs do not print, a formatting error may have occurred, or the printer has received invalid data. You can try to print the job (only part of the job may print) or delete the job.
What to do if my Lexmark Printer frequently jams?
Frequent paper jams may occur if you are using paper that does not meet the printer specifications. Use recommended paper and other specialty media. Ensure that the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder. Make sure the guides in the selected tray are set to the appropriate position for the size paper loaded. High humidity may cause the paper to absorb moisture. Load paper from a fresh package and store paper in its original wrapper until you load it.
General
