To Next PageTo Next PageWhy does my Lexmark Printer print incorrect characters?
Incorrect characters may print due to an incompatible parallel cable. If using a parallel interface, use an IEEE 1284-compliant cable. Also, check if the printer is in Hex Trace mode; if 'Ready Hex' appears on the display, turn the printer off and back on to exit Hex Trace mode.
What to do if the Lexmark C920 operator panel display is blank?
If the operator panel display is blank or shows only diamonds, it could indicate a failed self-test. Turn the printer off, wait 10 seconds, and turn it back on. If the 'Performing Self Test' and 'Ready' messages do not appear, turn the printer off and call for service.
How to resolve consistent misfeeds or jams in Lexmark Printer feeder?
To address consistent misfeeds or jams, flex the paper and turn the print media over. Also, ensure the feeder is properly installed, paper is loaded correctly and is not damaged, paper meets specifications, and guides are positioned correctly for the paper size selected.
Why my Lexmark C920 jobs do not print?
Several factors can prevent print jobs from processing. Ensure that 'Ready' or 'Power Saver' is displayed before printing. Clear a full output bin or load paper into an empty tray. Verify that you're using the correct printer driver, especially if using a USB port with older Windows versions. Also, check your network configuration if you're using a MarkNet N8000 series internal print server and ensure you're using a recommended and securely connected interface cable.
What to do if the Paper Jam message remains after removing the jammed paper from my Lexmark C920 Printer?
If the Paper Jam message persists after removing the jammed paper, ensure you have cleared paper from the entire paper path. Then, press the appropriate button to resume printing.
How to fix some documents not printing from my Lexmark C920 Printer?
If some documents do not print, it may be because they contain unavailable fonts. Open the document in Adobe Acrobat, click the printer icon, check the 'Print as image' box in the Print dialog box, and then click OK.
How to fix color fades with fuzzy edges on Lexmark Printer?
To address color fading with fuzzy, poorly defined edges on your Lexmark Printer: * Print a Menu Settings page to check supply levels. If a toner cartridge is at 10% or less, shaking it might help. * Remove cartridges and photodevelopers, then clean the LEDs with a lint-free, dry cloth to remove any stray toner. * Remove the supplies and ensure the LEDs can move upward freely. * Consider that debris in the contact blocks may be causing the fading. * Ensure the absorption roll/charge roll on the belt is securely seated. * Print the quality pages in Diagnostics Mode (under Print Test, Print Quality Pages) to identify the problematic color.
Why does the toner smear or rub off the page on my Lexmark C920?
To resolve toner smearing or rubbing off the page with your Lexmark Printer, ensure you're using recommended paper or media and that you've selected the correct Paper Weight setting. Also, verify that the top cover is completely closed and both sides are snapped shut. If the issue persists, you might need to replace the fuser.
How to fix light print or voids on Lexmark C920 Printer?
If the print from your Lexmark Printer is too light, or printed images or characters have voids, ensure you're using recommended paper or media from a new package. Check that you've selected the correct Paper Weight setting. Make sure the affected print unit is completely installed. You can also try setting print darkness to 4 from the Color Menu, cleaning the printhead LEDs, or gently shaking the toner cartridge to distribute the toner evenly. If these steps don't work, consider replacing the affected toner cartridge or the photodevelopers.
How to resolve light lines or streaks on Lexmark C920 Printer?
To address light lines or streaks on the printed page from your Lexmark Printer, begin by cleaning the LEDs. Ensure the affected photodeveloper is completely installed. Try removing the affected toner cartridge and gently shaking it to redistribute the toner. If the issue continues, replace the affected toner cartridge or the photodevelopers. If the problem occurs only when printing black, replace just the black photodeveloper. If it occurs when printing colors, replace all three color photodevelopers and the transfer belt.
General
