Lexmark CS410dn User Manual

Quick Reference
Learning about the printer
Using the printer control panel
31
2
4
8
7
6
910
5
Use the To
1 Display
• View the printer status.
• Set up and operate the printer.
2 Select button
• Select menu options.
• Save settings.
3 Arrow
buttons
Scroll through menus, or settings on the
display.
4 Keypad Enter numbers, letters, or symbols.
5 Sleep button Enable Sleep mode or Hibernate mode.
Notes:
• Pressing any hard button, attaching a
device to a USB port, sending a print job,
or performing a power-on reset with the
main power switch wakes the printer
from Sleep mode.
• Pressing the Sleep button or the power
switch will cause the printer to wake
from Hibernate mode.
6 Stop button Stop all printer activity.
Use the To
7 Back button Return to the previous screen.
8 Home button Go to the home screen.
9 Indicator light Check the status of the printer.
10 USB port Connect a camera or flash drive to the printer.
Understanding the colors of the Sleep
button and indicator lights
The colors of the Sleep button and indicator lights on the printer control
panel signify a certain printer status or condition.
Indicator light color and its corresponding printer status
Indicator light Printer status
Off The printer is off or in Hibernate mode.
Blinking green The printer is warming up, processing data,
or printing.
Solid green The printer is on, but idle.
Blinking red The printer requires user intervention.
Sleep button light color and its corresponding printer status
Sleep button light Printer status
Off The printer is off, idle or in Ready state.
Solid amber The printer is in Sleep mode.
Blinking amber The printer is entering or waking from
Hibernate mode.
Blinking amber for 0.1
second, then goes
completely off for 1.9
seconds in a slow, pulsing
pattern
The printer is in Hibernate mode.
Using the Embedded Web Server
Note: This functionality is available only in network printers or
printers connected to print servers.
If the printer is installed on a network, then you can use the Embedded
Web Server to do the following:
• View the virtual display of the printer control panel.
• Check the status of the printer supplies.
• Configure printer settings.
• Configure network settings.
• View reports.
To access the Embedded Web Server for your printer:
1 Obtain the printer IP address:
• From the TCP/IP section in the Network/Ports menu
• By printing a network setup page or menu settings page, and
then finding the TCP/IP section
Notes:
– An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
– If you are using a proxy server, then temporarily disable
it to load the Web page correctly.
2 Open a Web browser, and then type the printer IP address in the
address field.
3 Press Enter.
The Embedded Web Server page appears.
Loading paper and specialty
media
Setting the paper size and type
1 From the printer control panel, navigate to:
> Settings > > Paper Menu > > Paper
Size/Type >
2 Press the up or down arrow button to select the tray or feeder size,
and then press
.
3 Press the up or down arrow button to select the paper size, and
then press
.
1

Lexmark CS410dn Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Wi-Fi	No
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	75000 pages per month
Recommended duty cycle	800 - 6000 pages per month
Number of print cartridges	4
Page description languages	Microsoft XPS, PCL 5c, PCL 6, PDF 1.7, PostScript 3, PPDS
Maximum internal memory	2304 MB
Sound power level (standby)	16 dB
Sound pressure level (printing)	52 dB
Sound pressure level (quiet mode)	46 dB
Total input capacity	251 sheets
Total output capacity	125 sheets
Maximum input capacity	1451 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Card stock, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Ethernet, Wireless LAN
USB 2.0 ports quantity	2
Mac operating systems supported	Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Server operating systems supported	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Windows operating systems supported	Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Power consumption (printing)	580 W
Package weight	23800 g
Power supply type	AC
Number of power supply units	1
Operating altitude	0 - 2896 m
Operating temperature (T-T)	16 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Display	LCD

Weight and Dimensions

Dimensions (WxDxH)	442 x 407 x 291 mm

Summary

Learning about the printer

Using the printer control panel

Explains the printer control panel buttons and their functions.

Understanding the colors of the Sleep button and indicator lights

Details the meaning of indicator light and sleep button colors.

Using the Embedded Web Server

Guide on accessing and using the printer's web interface.

Loading paper and specialty media

Setting the paper size and type

Instructions for setting paper size and type via the control panel.

Configuring Universal paper settings

User-defined settings for printing non-preset paper sizes.

Loading the 250- and 550-sheet tray

Step-by-step guide to loading paper into the 250/550-sheet trays.

Loading the 650-sheet duo tray

Instructions for loading paper into the 650-sheet duo tray.

Loading the multipurpose feeder

Guide on how to load paper into the multipurpose feeder.

Loading the manual feeder

Instructions for loading paper into the manual feeder.

Linking and unlinking trays

How to link or unlink printer trays via the Embedded Web Server.

Paper type and print settings

Creating a custom name for a paper type

Steps to create custom names for paper types using EWS or control panel.

Assigning a custom paper type

Steps to assign a paper type to a custom name.

Printing a document

Instructions for printing documents from computer or control panel.

Printing in black and white

How to set the printer to print only in black and white.

Adjusting toner darkness

Guide on adjusting toner darkness via EWS or control panel.

Print job management and troubleshooting

Using Max Speed and Max Yield

Choosing between faster print speed or higher toner yield.

Canceling a print job from the computer

Steps to cancel print jobs from Windows or Macintosh computers.

Canceling a print job from the printer control panel

How to cancel a print job directly from the printer's control panel.

Clearing jams

General advice and steps for clearing paper jams.

Understanding jam messages and locations

Interpreting jam messages and identifying jam locations on the printer.

Clearing specific paper jams

Detailed instructions for clearing jams in various printer locations.