Paper source Grain direction
Card stock Labels
Index Bristol Tag Cover Paper
Optional 550‑sheet
tray (Tray 3)
grain long
grain short
163 g/m
2
199 g/m
2
163 g/m
2
203 g/m
2
176 g/m
2
216 g/m
2
180 g/m
2
Multipurpose feeder*
(Tray 1)
grain long
grain short
163 g/m
2
199 g/m
2
163 g/m
2
203 g/m
2
176 g/m
2
216 g/m
2
180 g/m
2
* Due to label design characteristics, unacceptable feeding may be experienced from the multipurpose feeder.
Media specifications
Labels Thickness: 0.102–0.305 mm (0.004–0.012 in.)
Smoothness: 30–50* Sheffield
Weight:
180 g/m
2
(48 lb bond)
* Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Up to 199 g/m
2
Index Bristol (110 lb)
Up to 203 g/m
2
Tag (125 lb)
Up to 216 g/m
2
Cover (80 lb)
Card stock and label guidelines
When printing on labels:
• From Print Properties or the printer control panel, set the Paper type to Labels.
• Do not load labels together with paper or transparencies in the same paper tray. Combining print materials can
cause feeding problems.
• Use only letter-, A4-, and legal-size label sheets.
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive
material may contaminate your printer. It could also void your printer and cartridge warranties.
• Do not use vinyl labels.
When printing on card stock:
• From Print Properties or the printer control panel, set the Paper type to Thin Card Stock or Thick Card Stock.
• Do not use card stock that is creased. It may cause paper jams.
Printer specifications 126
To Next Page
Loading...
