The following table lists the maximum weights supported.
Overview of card stock and label support
Paper source
Card stock Labels
Index Bristol Tag Cover Paper Vinyl
Tray 1 (standard tray)
163 g/m
2
163 g/m
2
—
163 g/m
2
—
For paper and transparency specifications, see the printer User's Guide.
Media specifications
Labels Width: 105–216 mm (4.1–8.5 in.)
Length: 220–297 mm (8.7–11.7 in.)
Weight:
120–163 g/m
2
(32–43 lb)
Thickness: 0.13–0.20 mm (0.005–0.008 in.)
Smoothness: 100–400 Sheffield*
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Up to 163 g/m
2
Index Bristol (90 lb)
Up to 163 g/m
2
Tag (100 lb)
Card stock and label guidelines
When printing on labels:
• Feed labels from Tray 1 only.
• Use only paper labels. Do not use vinyl labels.
• Use only label sheets that have no gaps between the labels.
Acceptable labels
Unacceptable labels
• Recommended labels are Avery 5260.
• From the operator panel or from MarkVision Professional, set the Paper Type to Labels.
• Do not print a large number of labels continuously.
• Do not use labels that have coating or sizing applied to make the labels liquid‑resistant.
• Do not use labels that have exposed adhesive on the label sheets.
Printer specifications 41
To Next Page
Loading...
