Lexmark E260d Series User Manual

Administrative support
Finding advanced networking and administrator
information
For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the
Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.
Restoring the factory default settings
If your printer is connected to a computer by a USB or parallel cable, use the Local Printer Settings Utility for Windows
or Printer Settings for Macintosh.
1 Open the utility.
2 Do one of the following:
• From the Local Printer Settings Utility menu bar, click Actions  Restore Factory Defaults.
• From Printer Settings, click Factory Defaults.
Warning—Potential Damage: Restore Factory Defaults returns all printer settings to the factory default settings
except the Port menu settings. All downloads stored in RAM are deleted.
You can also restore factory default settings using the printer control panel. For instructions, print a printer settings
configuration sheet.
Administrative support
92

Lexmark E260d Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Connectivity	USB 2.0, Parallel
Monthly Duty Cycle	Up to 50, 000 pages
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Input Capacity	250-Sheet Input Tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Executive, Folio, Letter, Legal, Statement, Universal
Maximum Paper Size	8.5 x 14 inches
Duplex Printing	Standard
Recommended Monthly Page Volume	500 - 2, 500 pages