Lexmark E260d Series User Manual

Printing the printer settings configuration sheet
The printer settings configuration sheet shows the current configuration settings. It also provides instructions on
how to navigate through the configuration menus to select and save new settings. To print the printer settings
configuration sheet:
1 Turn the printer off.
2 Open the front door.
3 Press and hold as you turn the printer on.
All the lights cycle.
4 Release .
5 Close the front door.
The light sequence representing the home menu appears.
Home Menu
- On
- On
- On
- On
6 Press until all the lights cycle.
The printer settings configuration sheet prints.
Note: The sheet prints only when the home menu light sequence is on.
Attaching cables
1 Connect the printer to a computer or a network.
• For a local connection, use a USB or parallel cable.
• For a network connection, use an Ethernet cable.
2 Connect the power cord to the printer first and then to a wall outlet.
Additional printer setup
22

Lexmark E260d Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Connectivity	USB 2.0, Parallel
Monthly Duty Cycle	Up to 50, 000 pages
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Input Capacity	250-Sheet Input Tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Executive, Folio, Letter, Legal, Statement, Universal
Maximum Paper Size	8.5 x 14 inches
Duplex Printing	Standard
Recommended Monthly Page Volume	500 - 2, 500 pages