Lexmark E260d Series User Manual

7 Insert the tray.
8 If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting.
For more information, see “Setting the paper size and type” on page 40.
Note: The difference between the standard 250-sheet tray and the optional 250- and 550-sheet trays is that the
standard tray accommodates up to 150 sheets of A6-size paper, so the width guides slide farther to the center of the
tray.
Loading the optional 250- or 550-sheet tray
Only one optional drawer, which includes either a 250- or 550-sheet tray, may be attached to the printer at a time.
Regardless of the number of sheets in the optional tray, it is referred to as Tray 2.
1 Pull the tray completely out.
2 See “Loading the standard 250-sheet tray” on page 40 to complete the steps for loading a tray. An optional tray
is loaded in the same way that the standard tray is loaded.
Loading paper and specialty media
44

Lexmark E260d Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Connectivity	USB 2.0, Parallel
Monthly Duty Cycle	Up to 50, 000 pages
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Input Capacity	250-Sheet Input Tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Executive, Folio, Letter, Legal, Statement, Universal
Maximum Paper Size	8.5 x 14 inches
Duplex Printing	Standard
Recommended Monthly Page Volume	500 - 2, 500 pages