Lexmark E260d Series User Manual

CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS
The Toner Darkness setting is too dark, the Brightness setting is too dark, or the Contrast setting is too high.
• From Print Properties, change these settings.
Note: This solution applies to Windows users only.
• From the Quality menu, change these settings.
THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
• Load paper from a fresh package.
• Store paper in its original wrapper until you use it.
CHECK THE PAPER
Avoid textured paper with rough finishes.
CHECK THE PAPER TYPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray.
THE TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.
Print is too light
These are possible solutions. Try one or more of the following:
CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS
The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.
• From Print Properties, change these settings.
Note: This solution applies to Windows users only.
• From the Quality menu, change these settings.
THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
• Load paper from a fresh package.
• Store paper in its original wrapper until you use it.
Troubleshooting
118

Lexmark E260d Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Connectivity	USB 2.0, Parallel
Monthly Duty Cycle	Up to 50, 000 pages
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Input Capacity	250-Sheet Input Tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Executive, Folio, Letter, Legal, Statement, Universal
Maximum Paper Size	8.5 x 14 inches
Duplex Printing	Standard
Recommended Monthly Page Volume	500 - 2, 500 pages