It may require some force to fully seat the card.
7 Ensure that each latch fits over the notch on each end of the card.
8 Close the system board door.
9 Turn the printer back on.
10 Open the printers folder:
a Click , or click Start and then click Run.
b In the Start Search or Run box, type control printers.
c Press Enter, or click OK.
The printers folder opens.
11 Right-click your printer icon.
12 Click Properties.
13 Click Install Options.
Note: Memory cards designed for other printers may not work with your printer.
14 Click Ask Printer.
15 Click OK.
16 Click OK, and then close the printers folder.
Installing hardware options
Installing a 250- or 550-sheet drawer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to move it safely.
Additional printer setup
19
To Next Page
Loading...
